Cold Stamping Deep Drawn Stainless Steel Sheet Metal Forming Parts
The metal drawing part is a stamping process in which a certain shape of flat blank or hollow part is molded into various open hollow parts by drawing. By stretching, thin-walled parts of cylindrical, stepped, box, spherical, conical and other complex shapes can be made. Therefore, drawing occupies a very important position in the stamping production of automobiles, tractors, electrical appliances, instruments, electronics, air, aerospace and other industrial sectors and daily necessities.
Metal stamping and drawing parts can be seen everywhere in our daily life. During mass production, metal stamping and drawing parts will cause various problems for various reasons. So what are the common problems of metal stamping and drawing parts?
1. The shape and size of the metal stamping and drawing parts do not match the shape and size of the metal stamping and drawing parts. The main reason for the inconsistency of the shape and size of the metal stamping and drawing parts is because of the spring and the inaccurate positioning. In addition to taking measures to reduce the springback, the reliability of the blank positioning should also be improved. .
2. Surface strain of metal stamping and drawing parts The surface strain of metal stamping and drawing parts is due to improper material selection, low heat treatment hardness, poor finish, wear of concave die fillets, poor surface quality of bending blanks, excessive material thickness, process Unreasonable program selection, lack of lubrication and other reasons.
3. Bending cracks in metal stamping tensile parts
Product parameters:
| Die Design & Open | We use the most advanced die design software Auto CAD, Solidworks, UG (dwg), we open dies and tools ourselves. |
| Our Capabilities: | tooling manufacturing, stamping, deep drawing, welding, tube bending and surface coating service |
| Range of Materials: | Metal sheets include carbon steel, stainless steel, alloy steel, aluminum, copper, etc. |
| Range of Material Thickness: | It is 0.2-10mm for punching, stamping, forming, no thickness limit for welding. |
| Processing Range: | Progression die, Cutting, Stamping, Deep drawing, Bending, Punching, Threading, Welding, Tapping, Riveting, Grinding |
| Surface Range: | Plating(zinc, nickel, chrome), electrophoresis, painting, powder coating, electrostatic spraying, hot dip galvanized, dacromet, anodic oxidation, blacking, polishing, anti-rust oil |
| Packaging | Our products are all packed in strong cartons and pallets/wooden cases to ensure zero damage. |
Product Tags:
|
|
Cold Stamping Deep Drawn Metal Parts Sheet Metal Forming Parts for Fastener Images
|
